The eight most taboo points of using a freezer
The eight most taboo points when using a freezer, such as the location and environment of the freezer, the temperature of the freezer varies in different seasons, but it is most avoided to tilt.
   1. The location and environment of the freezer should be placed in a place with low ambient temperature and good ventilation, away from heat sources and direct sunlight. When placing the refrigerator, leave proper space on the left and right sides and back to facilitate heat dissipation.
   2. Melted frozen food is first moved to the freezer freezer. The food placed in the freezer freezer before consumption can be transferred to the freezer freezer and gradually melted so that the cold can be transferred to the freezer, which can save electricity.
  3. Food packaging The food in the refrigerator and freezer compartment can be packaged with plastic bags or cling film to avoid dryness on the one hand, and frost from moisture on the other hand.
4. Avoid repeated freezing of food. For large pieces of food, you can package them separately according to the amount consumed each time by the family, and only take out the amount eaten once at a time, instead of taking out a large piece of food from the freezer and putting it after use. go back. Avoid repeated freezing, wasting electricity and destroying food.
   5. Do not put hot rice or hot water in the freezer, let it cool for a while before putting it in the freezer. Putting hot food* increases the temperature in the freezer, increasing power consumption, and the hot air of the food will deposit frost in the freezer.
  6. The temperature of the freezer varies in different seasons. The temperature adjustment controller of the freezer is the key to power saving. The temperature adjustment knob is generally set to "4" in summer and "1" in winter.
   Seven. The placement and environment of the freezer. The freezer should be placed in a location with low ambient temperature and good ventilation. Keep it away from heat sources and avoid direct sunlight. When placing the refrigerator, leave proper space on the left and right sides and back to facilitate heat dissipation.
   Eight, most avoid tilting. The compressor motor of the freezer is hung in a sealed metal container with 3 shock-absorbing springs. There is a danger of disconnection when it is tilted. The lubricating oil inside the compressor may also flow into the refrigeration system and affect the refrigeration effect.

Related Info
Selection skills of precision air conditioner and comfort air conditioner Simple estimation and measurement of indoor and outdoor wind pressure difference in fresh air system System handling guide after the refrigeration compressor is damaged The air source heat pump fan is attached to the air conditioner to assist in the cooling and heating function The difference between the three types of evaporators dry, flooded, and falling film evaporatorsThe eight most taboo points of using a freezer
Subscribe to relevant news content? 
Subscription
 Unsubscription
Recent related posts
Customers frequently viewed
IWAYA DENKI Water Pump 25CJT0752
US$2307.69
 Panasonic Servo Motor MHMF022L1V2M
US$653.85
 Honeywell Solenoid Valve VE4025B1045
US$334.62
 ROTEN Mechanical Seal 8E5K-22-X
US$384.62
 AirTAC Air Cylinder MDJ16X40-35S
US$26.31
 VAISALA Transmitter DMT132
US$1875.00
 SAJ Frequency Converter VFD PD20-4T011
US$278.57
 Bristol Compressor H21J253ABCA
Contact Us
 Bosch Rexroth Proportional Valve R414002008
US$1165.38
 VBI Bearing 5204-2RS
US$41.15
 Bristol Compressor T21J225CBCL
Contact Us
 HENGSTLER Encoder RI58-O/1024AS.41TG
US$326.92
 Samsung Capacitor CL10B202KB8NNNC
Contact Us