Power saving tips for air conditioners and refrigerators

Power saving tips for air conditioners and refrigerators

Seeing that summer is about to enter, the weather is getting hotter and hotter, and the air conditioner and refrigerator are also in handy. When the two "electric tigers" are turned on together, the electricity bill will also increase. Some friends It's too much. Is there any way to save electricity? Today okmarts.com is here to tell you some good ways, no thanks for taking it away!

Power saving tips for air conditioners and refrigerators

1. Air conditioning power saving tips

1. The temperature cannot be adjusted too low during the use of the air conditioner. Because the lower the temperature controlled by the air conditioner, the more power it consumes, so it is generally sufficient to lower the indoor temperature by 6 to 7 degrees.

2. The room temperature is set to 1 degree high during cooling, and the room temperature is set low 2 degrees during heating. Both can save more than 10% of electricity, and the human body can hardly notice this tiny difference.

3. When setting the power on, set high cold/high heat to achieve the control purpose as soon as possible; when the temperature is suitable, change the medium and low wind to reduce energy consumption and reduce noise.

4. The "ventilation" switch cannot be in a normally open state, otherwise it will increase power consumption.

5. Open doors and windows less can reduce heat entering the room, which is conducive to saving electricity.

6. For rooms with air conditioners, it is best to use thick curtains to reduce the loss of cool air.

7. The connecting pipe of the external machine does not exceed the recommended length, which can enhance the cooling effect.

8. When installing the air conditioner, try to choose the shade of the room to avoid direct sunlight on the body. If this condition is not available, the air conditioner should be covered with a sunshade.

9. Regularly remove the dust on the outdoor heat sink and keep it clean. Excessive dust on the heat sink can greatly increase power consumption.

Two, refrigerator power saving tips

When using the refrigerator, pay attention to the following issues:

1. Don't put the refrigerated items too densely, leaving gaps to facilitate the circulation of cold air, so that the food cools faster, reducing the number of compressor operations and saving electricity.

2. When putting fresh fruits and vegetables in the refrigerator, be sure to spread them out. If fruits and vegetables are piled together, it will cause cold outside and heat inside, which will consume more electricity.

3. For those larger foods, they can be packaged separately according to the amount of food consumed each time by the family, and only the amount eaten once is taken out at a time, instead of taking out a large piece of food from the refrigerator and putting it back when it is used up. Repeated freezing wastes electricity and easily damages food.

4. There are several methods for thawing, such as water washing and natural thawing. A few hours before eating, you can take the food from the refrigerator (about 4 degrees) to the micro-freezer (about 1 degree), because the air-conditioning of the frozen food can help maintain the temperature and reduce the operation of the compressor, thereby saving Electric purpose.

The layout of the refrigerator is also particular, and the following issues should generally be paid attention to:

When placing the refrigerator, you should generally reserve a space of 5-10 cm on both sides, 10 cm above, and 10 cm on the back to help the refrigerator dissipate heat.