Is the air-conditioning installation nonsense
Many people think that if the air conditioner is bought, the air conditioner in this home will be able to cool and heat super well, but in fact, the installation of air conditioner also has a crucial restriction on the performance of the air conditioner, so don’t underestimate those who say that air conditioner installation , They are not nonsense.
Today, the editor of okmarts.com brings you several points that need to be paid attention to when installing air conditioners. Friends who are planning to start air conditioners in the near future may wish to take a look.
The installation location should fully consider the space location and layout to make the airflow organization reasonable and unobstructed.
The following places are best avoided:
Places where flammable gas leaks or where there is a strong corrosive gas; places where artificial electric and magnetic fields are directly affected; places that are prone to noise and vibration (such as: air conditioners installed on protruding balconies will cause strong resonance and loud noise. Normally. Installed under the bedroom windows, separated by windows and walls, will greatly reduce noise.
And it’s easy to install it under the window, easy to clean, repair, and cover the air conditioner. In places with harsh natural conditions (such as oily smoke, wind and sand, it is easy to damage the air conditioner, and direct sunlight or high-temperature heat sources will make the air conditioner not cooling. Timely, air-conditioning is not cold); a place that is easy to reach by children. Furthermore, it is best not to install in wind, snow and rain.
The outdoor unit of the air conditioner should be as far away as possible from the neighboring doors, windows and green plants, and the distance from the opposite doors and windows should not be less than the following values: the rated cooling capacity of the air conditioner is not more than 4.5KW is 3 meters, and the rated cooling capacity is greater than 4.5KW is 4 meters.
The installation surface should be firm and strong, with sufficient load-bearing capacity. For example, in a narrow room, the indoor unit of the air conditioner should not be installed on a "short wall", but should be installed on a long wall.
Because the indoor unit is installed on the "short wall", it is easy to cause wind short circuit, which will affect the cooling effect. When the installation surface is the old wall or roof of the building, it must have solid brick, concrete or an installation surface equivalent to its strength. Pay attention to the quality of the bracket holding the air conditioner.
The pipelines are connected a little more leisurely
The air-conditioning inlet and outlet copper pipes are like arteries that transport blood circulation, and no pits, blisters and other defects are allowed, otherwise it will not work properly. Its connection with the indoor and outdoor unit interfaces is the key to the installation of air conditioners, and it also reflects the technical strengths and weaknesses of the installers.
When connecting the bell mouth of the copper pipe, it should be aligned and squared, and the direction and curvature should be reasonable. The pressure should be just right for a successful compaction. The leakage is 3‰ to 5‰).
