Can the chiller use a descaling agent for descaling

Can the chiller use a descaling agent for descaling

In fact, the use of a descaling agent for descaling is a common practice for the descaling work of the chiller. Therefore, the chiller can completely use the descaling agent for descaling. This is not a problem. The question is how to choose and use Descaler, this is the key to affecting the use effect and safety of the chiller!

　　How to choose a descaling agent?

　　 Actually, as for the descaling agent, there are special descaling agents for chillers on the market. If you want to clean the chiller, you must use the descaling agent for the chiller to ensure the normal operation of the chiller.

　　 Can the chiller use a descaling agent for descaling?

　　First of all, when purchasing the descaling agent, you must ask the merchant whether it can be used in the cleaning and descaling work of the chiller, or pay attention to the scope of application of the descaling agent or the precautions for use.

　　The water chiller can use the descaling agent for descaling, but you must make sure that the descaling agent you buy is suitable for the chiller!

　　 Then, after confirming that the descaling agent is suitable for the chiller, how to use it? The answer is: use it according to the product instructions, let’s talk briefly!

　　 Must stop first!

　　 When cleaning the pipeline, condenser, evaporator, or any other position or component, you should stop the normal operation of the chiller first, and then perform related cleaning and cleaning of the chiller.

After the shutdown, it is recommended to use special equipment to clean and clean the pipeline, and for the evaporator, condenser and other components, take the disassembly and clean (if the small chiller has the condenser disassembly conditions), or adopt a closed cleaning circuit To clean the pipeline after plugging, it is recommended to use a dedicated cleaning pump.

　　Secondly, the descaling agent may need to be diluted!

　　Many descalers often need to be diluted before they can be used normally. High-concentration descaler liquids and cleaning liquids may cause corrosion to pipelines or condensers.

　　 If you do not use the method of segmented cleaning, it is recommended to cycle the entire chiller system for more than one hour to ensure that the scale and impurities in the pipeline are completely removed before stopping the cycle. In the case of cyclic cleaning, it is recommended to use hot water with a higher temperature for the entire cleaning cycle to improve the cleaning effect, but attention should be paid to whether the descaling agent or cleaning agent can be used at high temperatures.

　　After cleaning, it is recommended to use clean water to restart before use, because after cleaning, the pipeline may contain residues of cleaning fluid and descaling agent, directly loading the compressor will cause abnormal system operation.