Omron Sensor E2E-X14MD2

08/19/2020

What should be prepared before the central air conditioner starts, come and see!

In recent years, with the rapid development of central air-conditioning in China, central air-conditioning is frequently touched during work and day. Everyone is enjoying the comfort brought by central air-conditioning,

01/19/2022

Transmitter Common Faults & Diagnosis Methods

Transmitter faults mainly include complete fault, bias fault, shifting fault, and precision degradation fault. This is shown in figure 2.

09/09/2020

The influence of machining on fatigue life

The residual compressive stress introduced by shot blasting/shot peening is a percentage of the final tensile stress strength, and this ratio increases as the strength/hardness of the part material itself increases. High-strength/hardness metals are more brittle and more sensitive to surface defects. Shot blasting/shot peening will allow these high-strength metals to be used in fatigue-prone working conditions. Aircraft landing gear is usually designed with a fatigue strength of 300 ksi (2068 MPa), combined with shot blasting/shot peening.

07/07/2020

Earth Hour: Hitachi Central Air Conditioner works with you to speak for the earth

09/07/2020

What is the principle of waste heat recovery Good for business

[Why] Air compressors are widely used. During their long-term, continuous operation, electrical energy is converted into mechanical energy and thermal energy according to the principle of energy conservation.

07/05/2020

Why is frost formed between the electronic expansion valve and the compressor

Why is frost formed between the electronic expansion valve and the compressor? A customer asked: The compressor is suddenly not cooling, and the electronic expansion valve is frosted to the compressor. Is there any relationship between the two before?

09/08/2020

Three requirements of modern industry for compressed air

In many chemical, food, ceramic, electronic industries and other industrial sectors that use compressed air energy, compressed air pollution can destroy other processes. Therefore, in order to improve the service life and reliability of pneumatic equipment and systems, and ensure the quality of the products produced, the compressed air must be purified and dried.

08/19/2022

What is Linear Motor and How Does It Work

electric motor is a device that converts electrical energy into mechanical energy

06/14/2020

How much future does using water as refrigerant

How much future does using water as refrigerant Refrigeration technology is always developing in the direction of high efficiency and environmental protection, but is it very futuristic to use water as a refrigerant?

08/16/2020

Do you know that water chillers are prone to these problems

1. Reasons why the chiller can't refrigerate 　　 1. The filter is blocked. When the filter is blocked, the dust on the condenser will accumulate, which will affect the cooling effect of the refrigeration equipment over time. If things go on like this, it may even cause refrigeration equipment to fail.