Which European certifications does the American rosemount3051 transmitter have
The rosemount transmitter is an American brand. There are 3 factories in the world, one in the United States, one in Singapore, and one in China. No matter which factory produces 3051 transmitters, there are different certifications, in order to meet the needs of various countries. Last time we introduced the safety certification of American rosemount transmitters in China, and today we talk about some certifications in European countries.
E8 ATEX Flameproof and Dustproof
Certificate: KEMA00ATEX2013X; Baseefa11ATEX0275X
Standards used: EN60079-0:2012, EN60079-1:2007, EN60079-26:2007, EN60079-31:2009
Marking: II 1/2 G, Ex d IIC T6/T5 Ga/Gb, T6 (-50 °C ≤ Ta ≤ +65 °C), T5 (-50 °C ≤ Ta ≤ +80 °C); II 1 D Ex ta IIIC T95 °C T500 105 °C Da (-20 °C ≤ Ta ≤ +85 °C)
Special conditions for safe use (X):
1. This device contains a thin-walled diaphragm. The environmental conditions that will affect the diaphragm should be considered during installation, maintenance and use. During the expected service life, the manufacturer's installation and maintenance instructions should be strictly followed to ensure the operation.
2. Please contact the manufacturer for the size information of the fireproof joint.
3. Some variations of the equipment have fewer marks on the nameplate. For the complete equipment mark, please refer to the certificate.
I1
ATEX intrinsically safe and dustproof
Certificate: BAS97ATEX1089X; Baseefa11ATEX0275X
Standards: EN60079-0:2012, EN60079-11:2012, EN60079-31:2009
Symbol: HART: II 1 G Ex ia IIC T5/T4 Ga T5 (–60 °C ≤ Ta ≤ +40 °C), T4 (–60 °C ≤ Ta ≤ +70 °C)
Fieldbus/PROFIBUS: II 1 G Ex ia IIC Ga T4 (–60 °C ≤ Ta ≤ +60 °C)
Dustproof: II 1 D Ex ta IIIC T95 °C T500 105 °C Da (-20 °C ≤ Ta ≤ +85 °C)
Input parameters HART fieldbus /PROFIBUS
Voltage Ui30 V 30 V
Current Ii 200 mA 300 mA
Power Pi 0.9 W 1.3 W
Capacitance Ci 0.012 µF 0 µF
Inductance Li 0 mH 0 mH
Special conditions for safe use (X):
1. This device cannot withstand the 500 V insulation test required by EN60079-11. This must be taken into consideration during installation.
2. The shell may be made of aluminum alloy and coated with polyurethane paint protective paint; however, it should be protected from impact or abrasion when it is in a zone 0 environment.
3. Some variations of the equipment have fewer marks on the nameplate. For the complete equipment mark, please refer to the certificate.
IA
ATEX FISCO
Certificate: BAS97ATEX1089X
Standards: EN60079-0:2012, EN60079-11:2009
Marking: II 1 G Ex ia IIC Ga T4 (–60 °C ≤ Ta ≤ +60 °C)
Special conditions for safe use (X):
1. This device cannot withstand the 500 V insulation test required by EN60079-11. This must be taken into consideration during installation.
2. The shell may be made of aluminum alloy and coated with polyurethane paint protective paint; however, it should be protected from impact or abrasion when it is in a zone 0 environment.
N1
ATEX n type and dustproof
Certificate: BAS00ATEX3105X; Baseefa11ATEX0275X
Standards: EN60079-0:2012, EN60079-15:2010, EN60079-31:2009
Marking: II 3 G Ex nA IIC T5 Gc (–40 °C ≤ Ta ≤ +70 °C); II 1 D Ex ta IIIC T95 °C T500 105 °C Da (-20 °C ≤ Ta ≤ +85 °C)
Special conditions for safe use (X):
1. This device cannot withstand the 500V insulation test required by EN60079-15. This must be taken into consideration when installing this device.
2. Some variations of the equipment have fewer marks on the nameplate. For the complete equipment mark, please refer to the certificate.
The above are some safety certifications of Rosemount transmitters in Europe. We can have more choices when choosing product safety certifications, which can also meet the needs of export. Next time we will talk about certifications in other countries.
