Does the floor heating temperature always fail to rise Maybe this can be solved
At present, floor heating has been widely used and applied in many places in our country. However, many owners report that the temperature of their own water and floor heating in winter is not very ideal, and even the floor heating installed in some homes has no temperature at all. After spending money but failing to get the desired heating effect, the owners really complained. So, why can't the temperature of water and floor heating rise? Let me listen to the editor to analyze the reasons.
1. There is air in the floor heating pipe. Turn on the floor heating switch. If you find that the main bar of the floor heating is hot but the return bar is not hot, it indicates that there is air in the pipe, which prevents hot water from entering the loop and circulates.
Solution: This is very simple, directly open the vent valve of the water separator to exhaust air until hot water comes out.
2. The pressure of floor heating pipes is not enough. Now there are many high-rise buildings, the floors are too high or the house is at the heating end of the district, and the pipe pressure is not enough, which leads to unsatisfactory heating effect.
Solution: In this case, the first thing s* should do is to find the property or heating company to solve it. If it still does not work, consider installing a circulating pump to increase the circulation of hot water to achieve the desired heating effect.
3. Floor heating pipeline embolism. Floor heating will cause pipe fouling every year. The average fouling is 1 millimeter per year. It seems that it is seldom not relevant, but this 1 millimeter may cause the water temperature to drop by 6-8 degrees Celsius, and central heating is still There will be problems such as silt, bacteria and algae, so if you say that it is not regularly cleaned, it will cause embolism in the floor heating pipeline.
Solution: Generally speaking, floor heating pipelines are cleaned once every 3 to 5 years, while other equipment should be cleaned before use every year. This should be done by a professional floor heating cleaning company, without clarifying the distribution of floor heating. , Try not to clean it yourself, it is easy to operate mistakes and damage the floor heating.
4. The floor heating filter is clogged. If the main bar of the water supply is not hot, it may be because the water quality is too bad or too dirty, so that the filter is blocked, which affects the normal circulation of the system.
Solution: first close both the water supply valve and the return water valve, and then use the adjustable wrench to open the filter to clean the filter inside, and then install it back after z*. If you are afraid of damaging the filter by yourself, you can ask a professional to clean it. Although it costs some money, it's much easier than doing it yourself.
5. Too much floor heating The heat of floor heating is transmitted from the bottom to the bottom. If there are too many floor heating covers and occupy most of the area of the room, it will affect the heat dissipation. Then the effective heat dissipation area is small, and it is easy for people to think that the floor heating is not hot.
Solution: Use legged furniture as much as possible, and do not lay a large area of blanket on the indoor floor, which is not conducive to heat dissipation. Although the blanket is comfortable to step on, it will greatly affect the heat dissipation effect.
