Mitsubishi Servo Motor HC-SFS102

06/25/2020

The air conditioner suddenly stopped cooling.

1.The air conditioner remote control may not adjust the temperature. 2. It may be that the air conditioner has not been cleaned for too long, which causes dust to accumulate on the filter net, so that the cold air blocking the air conditioner cannot be blown out. 3. There may be leakage of freon in the air conditioner, resulting in too little freon, and the air conditioner is not cooled. 4. Energy saving is due to unstable voltage, which causes the air conditioner to not be cooled. 5. It may be that the number of air conditioners is insufficient, and the small number of horses is not used for cooling in a large area of the house.

09/11/2020

Summary Essentials of water treatment for central air-conditioning chillers

Looking at the management of central air-conditioning throughout the country, it is found that very few are well managed, and all have problems of one kind or another to varying degrees. The main problems are described as follows: 1. Problems caused by the unreasonable design of the design department

08/08/2020

Knowledge of central air conditioning thermostat

Knowledge of central air conditioning thermostat The principle of central air-conditioning is the same as that of household air-conditioning, and its purpose is to set the room temperature according to the comfort of the owner.

06/14/2020

After the Mitsubishi air conditioner is turned on, the indoor compressor does not rotate and cannot be cooled

Fault phenomenon: After a Mitsubishi SRC285cENF air conditioner is turned on, the indoor fan operates normally, and the indoor compressor does not rotate and cannot be cooled.

12/29/2022

Advantages and Disadvantages of the PLC

The programmable logic controller (PLC) is a digital operating electronic system specially designed for application in industrial environment.

07/31/2020

Key points for safe operation of refrigeration operators in large cold storage

Generally, safe operating procedures should be formulated for the machines and equipment of refrigeration equipment, and refrigeration operators must strictly abide by them to ensure safe production.

08/20/2020

How to prevent moisture caused by steam penetration in cold storage projects

Under normal circumstances, excessive air humidity causes rapid growth of mold, moldy food, and corrosion of cold storage building materials. Therefore, the moisture-proof of cold storage projects is also particularly important.

08/17/2020

What is a plate heat exchanger What are its advantages and scope of application

The plate heat exchanger is stamped into a veneer with corrugated grooves of a certain regular shape from a thin metal plate (usually steel or stainless steel), and then the single pieces are assembled into the required multi-piece group.

08/17/2020

Industrial chiller fault code corresponding fault description and operation

Industrial chillers will inevitably have various types of failures during high-efficiency and long-term overload operation. Today, the editor of okmarts.com mainly shares with you the common failures in industrial chillers.

06/29/2020

Compression ratio of American Copeland compressor