Fuji VFD Frequency Converter FRN220F1L/D-2A121

11/09/2023

Centrifugal Fan vs. Axial Fan: Understanding the Differences and Applications

Centrifugal fans and axial fans are two common types of fan systems used in various industries and applications.

09/03/2021

How to Communicate PLC to VFD

PLC (Programmable Logic Controller) and VFD (Variable Frequency Drive) play an important role in industrial production and technological development.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

10/24/2025

Common Faults of Cold Storage (with a List of Fault Repair Methods)

Cold storage is an indispensable and important facility in many industries. They play a key role in storing and preserving various products. However, even with the most sophisticated systems, cold storage can suffer from various failures.

08/19/2020

The impact of excessive or small pump flow on the chiller

The chiller may have various types of failures. Why does the water pump fail with too much or too little flow?<br></br> 　　 In fact, whether the flow of the water pump is too large or too small, it will have a certain impact on the operation of the chiller, so it is not a good thing that the flow is too large or too small.

07/17/2020

Refrigerant used by Emerson Copeland compressor

With the global emphasis on environmental protection, our refrigeration industry is also the same, and gradually use some environmentally friendly refrigerants. Previously, the refrigerant used by Emerson Copeland compressors was R22, and R22 was not an environmentally friendly refrigerant. Later, Emerson Copeland Compressors gradually changed the compressors to use environmentally friendly refrigerants.

01/17/2024

Industrial Fans: Advantages, Functions and Differences from Ordinary Fans

Industrial fans are widely used in factory workshops, logistics warehouses, basketball stadiums, stations, dairy farms, etc.

08/20/2020

Three key points of cold storage planning and construction

With the gradual development of the cold chain refrigeration industry and the improvement of economic living standards, the planning and construction of cold storage has become a top priority for the development of the current cold chain industry.

03/16/2021

How to maintain the servo motor driver?

In order to prolong the lifespanof the servo system, you should pay attention to the following aspects. For the operating environment of the system, the temperature, humidity, dust, vibration and input voltage need to be considered. Please regularly clean the ventilation system of the numerical control device. Always check whether the cooling fans on the numerical control device are working properly. It should be inspected and cleaned every six months or a quarter depending on the environment of the workshop.

08/15/2020

Accurate selection of industrial chillers needs to meet 6 conditions

The accurate selection of industrial chillers needs to meet six conditions. When we need to purchase industrial chillers, the selection becomes an important issue for us.