Eaton Contactor ECN0104D3A

08/02/2020

The hazards and causes of high exhaust temperature of cold storage compressor

The discharge temperature of cold storage compressors should generally be 15~30℃ lower than the flash point of the lubricant, and not too high.

07/23/2021

How to Maintain Your Screw Air Compressor?

The screw air compressor adopts a single power connection and compressed air connection, and a built-in cooling system, which greatly simplifies the installation process.

09/03/2020

Why do compressors have to go to the workshop

Getting down to the workshop is actually a necessary stage that a compressor cannot bypass, just like socialism is the primary stage of communism (although this is rarely mentioned now, you must remember politics), this is a process.

08/16/2020

Precautions for use and installation of industrial chillers and refrigerators

1. Installation method 　　 (1) The industrial chiller should be installed directly on the horizontal surface, please do not install it upside down, diagonally or vertically.

09/06/2020

Application of Piston Rod Settlement Monitoring System in Reciprocating Compressor

1. Introduction A petrochemical plant imported a reciprocating compressor from abroad, the model is: B254-4118N3.3, 4 rows of symmetrical balanced type, the import and export parameters are: 135kPa (A)@14℃, 3.4MPa (A)@35℃, rotation speed: 425r/min, stroke: 240mm.

08/16/2020

Factors affecting the performance of cooling towers in water-cooled chillers

For water-cooled chillers, only a reasonably configured chiller can make the cooling efficiency of the water-cooled chiller reach a higher level.

06/14/2020

Electronic expansion valve

Electronic expansion valve The electronic expansion valve is a speed type and is used in an intelligently controlled inverter air conditioner. The advantages of the electronic expansion valve are: large flow adjustment range; high control accuracy; suita器2䀀
ￜ皥
䖒皦즠Ʋ煔क़㲈Ʋ
䌁皦
ᮔDž༬皧煞क़Ѐ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់ᩄꋔྦ
瑉浥

08/17/2020

Five important points for attention when selecting piston chillers

The main control parameters of piston chillers are energy efficiency ratio, rated cooling capacity, input power, refrigerant type, power supply voltage, etc. Below, the editor of okmarts.com introduces the selection points of piston chillers in detail.

09/02/2020

Discussion on Problems Caused by Suspected Minimum Pressure Valve of Compressor

In the process of using the compressor, in order to achieve the purpose of normal and high-efficiency production, most of the time, we will give more choices and maintenance to the host and spare parts, but often ignore some details such as safety.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start