Types of heat exchangers in the industrial chiller industry

Types of heat exchangers in the industrial chiller industry

For our refrigeration and heating industry, evaporators and condensers are used in many equipment, but let me tell you that with the continuous development of the industry, the evaporators and condensers of industrial chillers are also constantly changing In, so what are there? Let's look down together!

　　 One, evaporative condenser

　　Different from other two-device products, the evaporative condenser is neither an air-cooled heat exchanger nor a water-cooled heat exchanger. It combines the advantages of air cooling and water cooling to form its own powerful heat dissipation efficiency.

　　 2. Shell and tube heat exchanger

　　As a veteran product in water-cooled heat exchangers, shell and tube heat exchangers are mainly used in large-scale equipment such as freezing and refrigeration. The editor tells everyone that this is because of this feature. Once the shell and tube heat exchanger fails, it will affect the entire system and will inevitably cause great losses. Therefore, the quality of the shell and tube heat exchanger is very demanding.

　　 Three, fin heat exchanger

　　 Finned heat exchangers have been developed in the refrigeration accessories industry for a long period of time and have a wide range of applications. Since finned heat exchangers are prone to irreversible damage to products due to external forces during long-distance transportation, the requirements for the transportation and logistics of their products are relatively high. In order to reduce costs, finned heat exchanger manufacturers All over the country to facilitate the supporting development of the refrigeration industry.

　　 Four, tank heat exchanger

　　Compared with traditional heat exchangers, the tank heat exchanger has higher heat exchange efficiency, small size, and convenient water circulation. The water inlet is at the bottom of the entire waterway, which is convenient for drainage and can effectively reduce dirt. And the editor tells everyone that tank heat exchangers can be used as evaporators and condensers, or they can be connected in parallel or in series and piping to meet the requirements of large systems.

　　 Five, plate heat exchanger

　　 Since the plate heat exchanger uses fluid heat dissipation, the heat dissipation efficiency is very high, reaching 95%. In the two-device industry, the heat exchange efficiency can reach a handful of products. The plate heat exchanger can be used as an evaporator or a condenser. When it is used as a condenser, the water quality requirements are high, because once the scale is formed, the heat exchanger will be blocked. Water flowing into the refrigerant will cause the entire unit to be destroyed. Therefore, the plate heat exchanger must strictly control the water quality and control the evaporator flow and temperature during use.