Fuji Relay ST7P-2 DC24V

08/17/2020

What should I do if there is insufficient refrigerant in the chiller

What should I do if there is insufficient refrigerant in the chiller? Today, the editor of okmarts.com will teach you the correct way to deal with it. Please remember it!

09/14/2020

Application of oil-free lubrication technology in the cylinder of the high-pressure section of the piston-type nitrogen-hydrogen compressor

1. Raising the problem 　　 Compressor oil-free lubrication technology, as a new energy-saving technology, has been developed and applied to various compressors in various industries for more than 60 years.

12/12/2024

Mitsubishi Vs. Panasonic Air Conditioners

Summer is so difficult to spend that people without the air conditioner are like fish out of water. It’s critical to choose a good air conditioner.

06/21/2020

Common failure and analysis of centrifugal air compressor

Common failure and analysis of centrifugal air compressor 1. Abnormal vibration and noise: ① Misalignment ② The compressor rotor is unbalanced ③ The impeller is damaged ④ The bearing is abnormal ⑤ The coupling is faulty or unbalanced ⑥ The sealing ring is bad ⑦ The oil pressure and oil temperature are abnormal ⑧ There is dirt in the oil Clean, wear out the bearing ⑨ Surge ⑩ The stress of the gas pipeline is transmitted to the casing, which causes misalignment ⑪ There is a machine working near the compressor<img src="{{media url=&quot;Common_failure_and_analysis_of_centrifugal_air_compressor.jpg&quot;}}" alt="" />

07/19/2020

Screw chiller-the operation process of refrigeration compressor!

Screw-type (ie twin-screw) refrigeration compressors have a pair of mutually meshing rotors with helical teeth in opposite directions. A rotor with a protruding tooth surface is called a male rotor, and a rotor with a concave tooth surface is called a female rotor. The teeth of the rotor are commensurate with the piston,

03/01/2022

Introduction to the Principle, Types and Advantages of Gas Sensors

The gas sensor is used to detect specific gases in a certain area and continuously measure the concentration of gases as well.

07/21/2020

How to protect the refrigeration compressor, you must master the following knowledge!

When the compressor is running, some abnormal conditions may occur, such as: exhaust pressure is too high, suction pressure is too low, oil pressure is insufficient, motor is overheated, excess liquid enters the cylinder, etc. In the event of an abnormal situation, the compressor will be damaged if there is no protective measure.

12/29/2022

Advantages and Disadvantages of the PLC

The programmable logic controller (PLC) is a digital operating electronic system specially designed for application in industrial environment.

06/29/2020

Several causes of compressor burning

06/06/2022

How to Troubleshoot A PC Power Supply?

When a PC suddenly goes on the fritz for no apparent reason, checking the PC power supply first may save a lot of time troubleshooting the system.