Bosch Rexroth Proportional Valve 4WRAE6E03-2X/G24K31/A1V

06/14/2020

Trouble analysis and elimination of piston refrigeration compressor

Trouble analysis and elimination of piston refrigeration compressor Trouble analysis and elimination of piston refrigeration compressor 1) Large oil consumption of compressor 　　 Reason: The gap between the bearing, oil ring, cylinder and piston器2䀀
ￜ皥
䖒皦즠Ʋ嫜ི㲈Ʋ
䌁皦
ᮔDž༬皧嫦ིЀ呄ᠾ鹨់༹皧
ࠄ
00령ꐱ댁珵뛐珵Љ
䕄ྦ￿￿뤂ᐱ뚜珵ᴴᏩ呄ᠾ퍘ᒥ鹨់

12/14/2022

What is a Memory Card?

A memory cards is an electronic data storage device used for storing digital information, typically using flash memory.

09/11/2020

Thrust bearings

Thrust bearing: Rolling bearing mainly used for bearing axial load, its nominal contact angle is 45-90 degrees. According to the difference of nominal contact angle, it is divided into:

07/20/2020

Pay attention to these for compressor maintenance safety!

Oxygen blowing system is forbidden: Oxygen is colorless, odorless, non-toxic, non-combustible and non-explosive. However, mixing with other combustible or explosive gases will promote combustion or explosion;

09/09/2020

Compressor companies have caused the misunderstanding of killing, how many tricks have you hit

In recent years, many machinery manufacturing companies, including the compressor industry, have suffered unprecedented tests. Some are not adaptable due to the transformation of the economic system, and there are also "secret injuries" from the company’s own business strategy.

09/15/2020

Adjustment of main machine clearance of twin screw compressor

I repaired a main engine with locked rotor in the early stage. It is an EP200 model produced by Ingersoll Rand in 1997. Before I repaired it, Ingersoll Rand itself could not repair it. Because the main engine was severely deformed and the rotor and cavity Severe body adhesion.

06/29/2020

Suggestions for troubleshooting of compressor with liquid start

08/01/2025

What is Refrigeration Cycle? The Refrigeration Cycle Explained

The refrigeration cycle is a cyclic process in which heat is transferred from a low-temperature object (or environment) to a high-temperature object (or environment) through a refrigerant, thereby cooling the object to a temperature lower than the environment and maintaining this low temperature.

08/17/2020

Too high or too low oil pressure of industrial chillers affects normal operation

When using industrial chillers, regular inspection and maintenance work is essential. In the absence of basic maintenance and regular inspections, many industrial chillers are prone to different failures.

06/29/2020

The role of freezing oil in screw refrigeration compressor

The role of freezing oil in screw refrigeration compressor The role of lubricating oil: 　　 1) A dynamic seal is formed between the screw and the compression chamber and the male and female screws to reduce refrigerant leakage from the high-pressure side to the low-pressure side during the compression process.